Celair Profile Series Manuale di Installazione Scaricare il pdf (Pagina 8)

Installation Instructions

3.0 Unit Installation

Profile

3.3. Installing the Air Conditioner

3.3.1. Remove 4 Louvre panels from unit and place in a safe place to ensure no

damage. To remove Louvre:

STEP 1. Lift the Louvre assembly up approximately 15mm over the corner

post location.

STEP 2. Tilt the Louvre back from the top of unit and remove.

3.3.2. The venturi / fan assembly can be removed to assist in carrying the unit on the

roof. To remove the fan / venturi assembly:-

STEP 1. Disconnect the motor loom from the control box in unit.

Caution: Ensure motor wires are reconnected correctly otherwise

the product warranty may be void.

It is also possible to remove the electrical control box and

pump assembly to avoid disconnecting the electrics.

STEP 2. Remove fan / venturi assembly by releasing the venturi from the

location notches lifting vertically. (There are 4 location notches

holding the venturi in place.)

STEP 3. Carefully remove fan from the cabinet, not bumping the fan

assembly.

Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Nessun commento

Celair Profile Series Manuale di Installazione Pagina 8